Musway DSP Converter — REV Car Audio

Converts Musway M-series DSP tunes from the legacy binary format into the 512k JSON format used by the 512k app. Works for single preset and all-presets files across different amp models. Drop both files below — the converter auto-detects format and channel count.

✓ Converts Automatically

✓All EQ bands — all channels, all presets31 bands/ch · gain, Q, frequency
✓Crossover frequencies (single preset files)HPF & LPF Hz values loaded; enable toggle set manually
✓Channel count — auto-detected from sourceWorks for any amp model, no setup needed
✓Device metadata from your blank templateModel, routing, input channels preserved

⚠ Enter Manually After Loading

↳Enable HPF / LPF per channelFrequencies are loaded — just toggle each filter ON
↳Crossover slope typesEncoding varies; set slope manually per channel
↳Crossover points — all-presets files onlySingle-preset files do convert crossover Hz values
↳Channel delays · Output levels · Phase/polarityNot stored in the old format's per-channel blocks

The blank template (Step 2) is how the converter knows your amp's channel count — export it from your 512k unit in the Musway app.

Old Tune File

🎛

Drop or click to upload

Legacy binary format (pre-512k)

single_preset.ini all_presets.ini

No file loaded

What is this? The .ini file exported from the old Musway app. Single-preset files save as one channel block (~1991 lines). All-presets files save all 6 presets (~22,000+ lines).

→

Blank Template

📄

Drop or click to upload

512k JSON export from your unit

single_preset.txt all_presets.ini

No file loaded

How to get this: Open the Musway app on the 512k unit → save or export a blank (factory reset) preset to your phone. Upload that file here. It tells the converter how many channels the amp has and carries the device metadata over.

Legacy Binary → Musway 512k Converter